Uni-sensor

• power switch

Press the switch briefly to turn on the power. The same is true when cutting. Calibration data is saved when the power is turned off.

​

• config mode

- When entering config mode from a PC

With the sensor powered on, use the Uni-motion Settings Manager and press the "Enter Config Mode" button.

​

- manually enter to config mode

With the power on, press and hold the power switch for 5 seconds or more, then release the switch.

 

To exit config mode, short press the switch or press "reboot sensor" in the Uni-motion Settings Manager.

​

• indicator LED

Lit state: The sensor information is being sent to the Uni-station.

Blinking slowly: Disconnected from the Uni-station and waiting.

Blinking state: Config mode.

​​